Power and Signal Connectors for Rugged Application Environments:
The Spacecraft SCP connector series is based on MIL-DTL-5015.
All styles are available with wire sealing grommets and interfacial seals for environmental protection. When equipped with appropriate backshells and accessories, the connectors meet the requirements of IP67.
The Spacecraft SCP Series share the same insert arrangements and electrical performance ratings of MIL-DTL-5015. Contact types include solder, crimp and PCB type in both gold or silver plating. Thermocouple contacts are also available.
Depending on the application requirements, the following options are available:
The SCP series is well suited for use in rugged applications where EEC compliance for electromagnetically compatibility is required. A complete range of EMI shield termination accessories is available for either overall or individual wire shields.
Spacecraft offers a wide variety of connectors that utilize the MIL-DTL-5015 insert arrangements.
| MIL-DTL-5015 Series 1 | MIL-DTL-5015 Front Release Series II | MIL-DTL-5015 Rear Release Series II | Reverse Bayonet | QWL | QWLD | |
| Coupling | UNF Threads | UNF Threads | UNF Threads | 1/3 turn Bayonet | Double Start Threads | Double Start Threads |
| Shell Keyways | 1 | 1 | 1 | 1 | 1 | 5 |
| Rear Accessory Threads | Right Hand | Right Hand | Right Hand | Right Hand | Left Hand | Left Hand |
| Backshells | with Connectors | Not Supplied (1) | Not Supplied (1) | with Connectors | Not Supplied (1) | Not Supplied (1) |
| Contact Type | Solder or F80 Crimp | Crimp | Crimp | Solder or F80 Crimp | Solder or F80 Crimp | Solder or F80 Crimp |
| Contact Retention | Rubber | Metal Clip | Metal Clip | Rubber | Rubber | Rubber |
| (1) = Backshells must be purchased separately | ||||||